Become a Member
HPE Bridge aggregation (BAGG) is method of combining multiple physical connection into one single virtual interface increase the throughput. To Create Bridge aggregation (BAGG) following steps need to be considered 1.Create a Bridge aggregation interface , by default it takes static...
Some machines does not receiving LAN or internet. I'm getting general ping failure. I'm plugged directly in the switch and everything is working. Please, help me. Edit#1: I activate the dhcp relay on some switches which was not active and powered on the spanning tree protocol with the core...
Thank you for the reply. In the link aggregation status all Baggs created show running as normal, without any advice. All Baggs was created as static. The Wireshark capture shows a lot of broadcast traffic when the machine is on the restart process. Another way to create a bagg is a dynamic bagg...
Hi folks. Good morning. I'm here to ask a question about the STP functioning. I have the following topology: 1 HP 5500 HI 48G as the core switch. (RSTP enable, BPDU guard enable) 7 HP 1910 48G (STP are disable on all switches. 5 of this 1910 are connected through a BAGG (fibre) of 2 Gb...
I fix this checking all switches and all ports. Configuring each port that was misconfigured as an example, printer ports was as a trunk not access port. Checking the ports that need to be in access mode and checking the ports that has an access point attached to (in my case, a Cisco AP that...
Hi there. I probably missed a post with the answer when I searched for this but here I go. Background, I am used to procurve and now made the move to a new comware based core. My previous setup was a procruve connected to another procurve with LACP trunks with all vlan tagged on...