Become a Member
Hello, After some (unsuccessful) researches, is there an appropriate MIB/oid for queyring HPE 5130 Comware type switch in order to get the exact number of switchs in an IRF pile (1 to 9 max.) I've found an oid query for each switch in the IRF pile returning the switch S/N. This mean i've...
Hi everybody! I hope this is the right place to ask and that someone can help me here. We are setting up hundreds of new Comware 7 FlexFabric 5940 switches. To speed things up and to automate it we are using the ansible modules (https://github.com/HPENetworking/ansible-hpe-cw7) and the...
Hi, We are trying to configure sFlow or Netstream on an interface Vlan-interface on a Comware v7-based switch in order to send traffic samples to an sFlow/Netstream collector, but it seems the commands are not available: sys System View: return to User View with Ctrl+Z. [hpe]int vlan 1 ...
Hello Everyone, I need your help. I have a piece of equipment at our colo where I need to get to the console port. In CISCO land, I can configure the CISCO Routers console port to be an outbound connector i.e act as a serial port and allow me to connect to the console of the remote equipment....
Hi all I'm new to Comware switches and Im configuring new HPE 5945 core switches with Procurve attached as edge switches. We have two cores and I'm using VRRP for high availablility. Provcurve configuration for VOIP is extremely simple (i.e you just put 'voice' on the VLAN) The...