Become a Member
I understand that most devices now a days have autosensing technology built into them however do I need to use a crossover cable to connect my 1920G to another switch (TP 24 port). I have tried and it never gets a DHCP address (I am not using the SFP ports). Yet, other systems on the same...
Here's a show interface for the port, looks good I'd say. Link Status : Up Totals (Since boot or last clear) : Bytes Rx : 2,292,148,536 Bytes Tx : 3,825,949,595 Unicast Rx : 22,107,770 Unicast Tx : 33,834,939 Bcast/Mcast Rx : 261,365 Bcast/Mcast Tx : 102,984,687 Errors (Since boot...
Thank You "Richard" This site is also useful to me, but i want technical support my problem is crossover cable is support to cisco ip phone 7960g but "Stright Through Cable is not Getting Power" And my swtich model is : HP ProCurve Switch 2610-24-PWR (J9087A) #crossovercable
TFTP Procedure Here is a short description of how to TFTP a firmware image onto a Colubris/HP device. 1. Attach a CROSSOVER LAN cable from a PC to the LAN connector of the AP/AC (or use a HUB with straight-through cables. Do not attach any cable to the Internet port of the AP/AC. ...
Hi, Could any one help me step by step to set up my two pc's both with Windows 2000, pc-1 has 2 Netword card which is connected to cable modem and the other one connect to pc-2 using crossover cable, I would like to make pc-1 as host and pc-2 to be client. I would like to share the internet and...