Become a Member
Hi! First let me say that we've got working Cisco IOS, NX-OS, IOS-XR, Juniper OS, Brocade Fabric OS, HP ProCurve and Comware 5; however NOT Comware 7. For TACACS we're using tac plus probono! (read carefully as there are several versions out there) Configuration on the HP Comware 7: ...
We are configuring VRRP groups on HPE FlexFabric 5940 2-slot JH397A with Comware version 7.1.070, Release 2510P02. After trying to configure 257th instance we receive the foolowing error message. Number of virtual routers on the device has reached the upper limit. Is there way to configure...
Hello, we are currently changing our Routers from Cisco to HPE and stumbled on a, hopefully small problem. We have the following route configured on our Cisco devices. ip route X.X.X.X X.X.X.X DHCP So my question are there any Commands on the HPE Devices that are similar? Our...
Hi guys, I have a HP 5130 7.1.045, Release 3111P02 in a Switch Stack . I get how to upgrade the Firmware, my only problem is how do i do this without connection loss of both members? At the moment it looks like this #Upload the Firrmware to switch ftp 127.0.0.1 #activate binary mode...
Hello, I have a customer who recently migrated from old 5400 Procurve series to 3 5930 switches in an IRF, acting as core. Among other services, the customer has two clusters configured with Microsoft NLB. When they were using the 5400, the service was running smoothly. There was no...