Become a Member
Hello Ken, have a look to this old document (it was published - its purpose was - to help understanding the differences between ...
If the two VSX Clusters (BAY001 and BAY002), which are Layer 2 interconnected together in your last design, are each one connected ...
Hello! Unfortunately, no solution as of yet. Regards, Fred Get Outlook for iOS
Did you try to create active-gateway on the CX10k VSX Pair without removing the 8325 ? I believe you could do that with a different ...
Hola! por ejemplo un buen estado NTP podría ser este ( escribí a.b.c.d y e.f.g.h en lugar de las IP privadas de los servidores ...
Hi, Environment: I have 2 setups (6.10 and 6.12), 6.10 have a different credential for DUR, shared secret and tacacs secret, ...
Hello Horst and welcome! Yes, your two Aruba 5400R zl2 (deployed as a Distributed Trunking pair - a DT pair - with/without ...
Set the IP and protcol and prepare your "server" with tftp server or ftp server, then fetch the firmware "<2> Update Main Application ...
Should have read the full thread .... 😉 There is no option (known to me) within AOS-CX CLI to hand over the password ...
Thanks for the update :) ------------------------------ PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, ...
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.