Search

1 to 10 of 271176
Sort by

Discussion Reply
RE: Prevent output from being broken into sections of 32 APs

That did it! Thank you very much! -- William Songstad --


Discussion Reply
RE: Prevent output from being broken into sections of 32 APs

Hi Bill, You can add a "pipe include" to your command. Does it solve your main problem? show ap database | include APPHS -- Marcel Koedijk | MVP Expert 2020 | ACMP | ACCP | Ekahau ECSE --


Discussion Reply
RE: IAP/AirWave 'mismatches'

How are you managing the iAP configuration? One of the key benefits of Airwave is the ability to manage them, as well as to monitor and not mismatched etc. To have a mismatch, Airwave must already have a template in place - probably imported from the first iAP you put into the group. If the...


Discussion Reply
RE: Jumping from Unifi AP:s to IAP-305

Thanks Matthew I will. I'm keeping my fingers crossed for the arubas to be able to work with my current setup. Unifi gave me headaches. But then again these babies are enterprise level aps so my hopes are high. I'll post back when they have arrived and I have implemented them. -- Tobias --


Discussion Reply
RE: Aruba Virtual Switch OS CX 8400 Dynamic Segmentation Possible?

Should be awesome if this could be possible to practice for the new ACMX training. But thinks isn't easy to virtualize this. -- Marcel Koedijk | MVP Expert 2020 | ACMP | ACCP | Ekahau ECSE --


Discussion Reply
RE: Jumping from Unifi AP:s to IAP-305

There's no reason the Aruba iAP wouldn't work in your network - the web-page-GUI for configuring is fairly intuitive. Most of the defaults should let your devices communicate well enough. VLAN tagging is straight forward. You will need to fiddle with settings to see which work best in your...


Discussion Reply
RE: 6300M Switch VSF | Out-of-band management port on each stack member?

Thank you! Sounds like a good solution with the aux USB port being enabled for this purpose. We are going to use that. One last question on the OOBM port: if we have a stack of two or more 6200/6300 units and all OOBM ports are connected to the same management network. Will the OOBM port of the...


Discussion Reply
RE: AOS 8 Clustering in active/passive datacenters

https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=33139 -- Victor Fabian, ACEX#8 Mobility Architect @ WEI --


Discussion Reply
RE: 6300M Switch VSF | Out-of-band management port on each stack member?

We are working on getting that info into the documentation set. The USB-A 'aux' port on the 6300 and 6200 switch families can be used for any of the following purposes: Bluetooth adapter USB Mass Storage USB-to-serial console access When using a USB-to-serial adapter, the same 115200 baud rate...


Discussion Reply
RE: Aruba 8320 interface discard question

Thanks for feedback ! -- PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info).. ACEP / ACMX #107 /...