Become a Member
Hi all, I really need help with the following topology: Cisco uc320w as dhcp server from vlan 1 (192.168.1.0) and vlan 100 (10.1.1.0) then go throw lan to: Switch HP 2520, I just created the vlan 100 and tagged to all port, and set it as voice, that is the only config I set it. the problem:...
Hi all I'm new to Comware switches and Im configuring new HPE 5945 core switches with Procurve attached as edge switches. We have two cores and I'm using VRRP for high availablility. Provcurve configuration for VOIP is extremely simple (i.e you just put 'voice' on the VLAN) The...
Hello We have HP 1920 (JG924A) switch at remote location. Having only 1 VLAN (Default VLAN - 1). All ports are access ports. Switch HP 1920 is connected with another uplink switch HP E-3800 that too has only 1 VLAN (Default VLAN-1) all ports are untagged in VLAN 1. That switch HP e-3800 is...
Hi mekand, here's what the configuration of one of our 5120-EI switch looks like. VoIP config: voice vlan mac-address 0080-9f00-0000 mask ffff-ff00-0000 description Alcatel phone # vlan 69 name VoIP quit # vlan 71 name Client quit # interface GigabitEthernet1/0/1 port...
Hello, Upon further reading it would seem that the poe pre-standard detect was once only in the switch models using a true "provision" chipset (3500/3800/5400/8200 etc). It may by now be in other models further down in the range but maybe not in one of your switches vintage. If that...
Hi all, I have a requirement to configure QoS on Procurve 2524 and 1920 Switches für VoIP. On Edge Ports there are Cisco IP Phones connected. On each IP Phone Switche there is on PC Connected I need to make sure that voice data and signalling traffic is keeps it marking while data traffic...