Become a Member
Still no answers -- Original Message: Sent: Jul 13, 2018 04:27 PM From: mr vaughn Subject: 1950 QoS configuration for Voice vlan and observation of DSCP We have IRF stack with 3x1950 (JG963A) switches in them. I have all users on default vlan 1. Voice traffic and IP...
Hi all, I really need help with the following topology: Cisco uc320w as dhcp server from vlan 1 (192.168.1.0) and vlan 100 (10.1.1.0) then go throw lan to: Switch HP 2520, I just created the vlan 100 and tagged to all port, and set it as voice, that is the only config I set it. the problem:...
Hello, I would like to configure switches in order to plug Cisco phones (7841 for ex) using only LLDP MED without knowing the mac address of phones. I have tried but I have to put the line below in order to make phones working. # voice vlan mac-address xxxx-xxxx-xxxx mask ffff-ff00...
Hello all I am a novice to switches but I know the basics. I am trying to setup my switch to allow my IP phone to connect to my Voice network VLAN 30 and my PC to connect to the same port via the PC port on my IP phone VLAN 1. I have setup my VLAN’s and the access port has VLAN 1 untagged...
We have IRF stack with 3x1950 (JG963A) switches in them. I have all users on default vlan 1. Voice traffic and IP phones are all on vlan2. The Voice system (Shoretel/mitel Connect) add DSCP markings to the voice traffic with a vault of DiffServ / ToS byte 184 (DSCP = 0x2e) How do I...
Hello all I have an issue configuring QoS on voice vlan. I did the following config : ************* lldp global enable voice-vlan track lldp vlan 31 name ToIP description ToIP interface GigabitEthernet1/0/17 port link-type trunk port trunk permit vlan 1 10 port...