Become a Member
Hi, my work place using all acsess point HP MSM410 (J9427C), MSM430. I cannot login to the web interface because the firmware versions are outdated. I downloaded the files on the product's download page but error while downloading firmware. Message: ‘Firmware upgrade aborted because the new...
Hi, MSM720 controller unable to detect AP MSM430 after reset via a hole on the bottom of the AP. I already follow the guideline from this url https://support.hpe.com/hpsc/doc/public/display?docId=c04915287 but still not detect. I also cannot access web browser https://192.168.1.1/. ...
There are 4 MSM430 connected via Phihong POE36U-1AT-R to HP 4204VL, managed by MSM710. There is a 5th one in a different room. SInce the weekend none of the 4 is recognized by the 710. The 5th is working. If I change the 5th with one of the 4, it is working there, too. If I bring any of them...
Hi. All 65 of my MSM430 are performing quiet bad on 2,4GHz. If I replace one of them in a classroom at put up another type (Tried a Cisco) it runs perfectly. If I remove one from the controller and run autonomous on it, it still performance bad. Signal quality looks great. It is like there...
I have a number of MSM430 APs operating autonomously, powered from an HP1910 POE switch. Each has 4 SSIDs and 4 VLANs. The problem is that the signal strength fluctuates wildly even when the receiving device is right next to the AP. To the extent that the device is disconnected until the signal...